Stainless Steel Shear Beam Load Cell for Bed Weighing ScaleProductions
QH-21D load cells are available in the capacities from 0.5t to 2t.
Alloy steel & stainless steel construction with single shear beam type.
Silicon adhesive sealed inside, waterproof, anti-corrosion and suitable for all kinds of environment.
Integral structure and easy installation.
Suitable for electronic platform scales, truck scale, floor scale ,hopper scale and other electronic weighing devices.Features:
Capacity :0.5t to 2t
Defend grade: IP66
Alloy steel & stainless steel single shear beam.
Low profile and nice exterior.
|rated output||mV/V||3.0 ± 0.003|
|excitation voltage||Vdc||9 ~ 12|
|combined error||%FS||± 0.02||±0.03|
|zero unbalance||%FS||± 2|
|input resistance||Ω||350 ± 5|
|output resistance||Ω||350 ± 3|
|insulation resistance||M Ω||≥ 5000 @ 50 Vdc|
|operating temperature range||ºC||-20 ~ +55| Electrical connection:
|compensated temperature range||ºC||-10 ~ +40|
|temperature coefficient of SPAN||%FS/10ºC||± 0.02|
|temperature coefficient of ZERO||%FS/10ºC||± 0.03|
Excitation+ red Excitation- black Signal+ green Signal- white
Four-core shielded cable with polyethylene. Cable is not connected with elastomer.
Cable length:3 m
Cable diameter :5 ±0.2 mm
The cable length could be chose by customer's application.